Department of Mechanical Engineering

 

Introduction Faculty Laboratory Library Achievements Events Placement Research

 

GALLERIES











FACULTY JOURNAL PUBLICATIONS


Calendar Year: 2015


    1. Mathivanan,P., “Study on the Impact strength properties due to addition of Cloisite 30B in Glass Fiber Reinforced Epoxy –Aluminum laminates,” International Journal of Applied Engineering Research, 10(68) pp. 728-731, 2015.

  • 2. Mathivanan, P., Saparivel, P.P., “Flow characteristics of Catalytic muffler and optimization of design using CFD,” International Journal of Applied Engineering Research, 10(39) pp.29430-29434, 2015.


  • 3. Ananth, G., Vinayagam, B.K., “Development of simplified total productive maintenance system for tiny industries and its implementation,” International Journal of Applied Engineering, 10(11), pp.29485-29503, 2015.


  • 4. Ananth, G., Vinayagam, B.K., “Effectiveness Improvement through Total Productive Maintenance Using Particle Swarm Optimization Model for Small and Micro Manufacturing Enterprises,” International Journal of productivity and Quality management, 16(4), pp.473-503, 2015.


  • 5. Senthil Babu, S., Vinayagam, B.K., “Surface roughness predication model using adaptive particle swarm optimization (APSO) algorithm,” Journal of Intelligent and Fuzzy Systems, 28, pp.345-360, 2015.


  • 6. Senthil Babu, S., Vinayagam, B.K., “Roughness Analysis of the Holes Drilled on AL/Sic Metal Matrix Composites using Atomic Force Microscope,”Applied Mechanics and Materials, 766-767, pp.837-843, 2015.

Calendar Year: 2014


  • 1. Velmurugan,C., Subramanian, R., Ramakrishnan, S.S., Thirugnanam,S., Kannan, T., Anandavel, B., “Experimental Investigations On The Effect Of Heat Treatment Parameters On The Wear Behaviour Of Aluminum Hybrid Composites,” Industrial Lubrication and Tribology, 66(4) pp. 545–554, 2014.


  • 2. Sivakumar, K., Natarajan, E., Kulasekharan, N., “Experimental Studies on Turbulent Flow in Ribbed Rectangular Convergent Ducts with Different Rib Sizes,”International Journal of Heat and Technology, 32 (12) pp. 79 – 85, 2014.


  • 3. Sivakumar, K., Natarajan, E., Kulasekharan, N., “Influence of Rib Height on Heat Transfer Augmentation – Application to Aircraft Turbines,” International Journal of Turbo jet engines, 31 (1) pp. 87-95, 2014.


  • 4. Sivakumar, K., Natarajan, E., Kulasekharan, N., “Heat Transfer And Pressure Drop Comparison Between Smooth And Rib-Roughened Divergent Rectangular Duct,” International Journal Engineering and technology, 6(1) pp. 263-272, 2014.


  • 5. Sivakumar, K., Natarajan, E., Kulasekharan, N., “Design Optimization of Rib-Roughened Convergent /Divergent Channel to Enhance Turbulent Heat Transfer,” International Journal of Innovative Research in Science, Engineering and Technology,3(1) pp.7-12, 2014.


  • 6. Ananth, G., Vinayagam, B.K., “A Study on the PSO Model Based Fast Track Total Productive Maintenance for Small and Tiny Enterprises,” 8 (5) pp. 941- 947, 2014.


  • 7. Ananth, G., Vinayagam, B.K., “A study on the PSO model based quick total productive maintenance for small and tiny enterprises,” Journal of Theoretical and Applied Information Technology, 70(1) pp. 186-195, 2014.


  • 8. Senthil Babu, S., Vinayagam, B.K., “Experimentation on drilled hole surface roughness of Al/SiC Metal Composites,”International Journal of Applied Engineering Research, 9(23)pp.20085-20097, 2014.


Calendar Year: 2013


  • 1. Sivakumar, K., Natarajan, E., Kulasekharan, N., “CFD Simulation and Experimental Investigation of Convection Heat Transfer In A Rectangular Convergent Channel With Staggered Ribs,” International Review of Mechanical Engineering, 7(3) pp. 541-548, 2013.


  • 2. Gnanasundara jayaraja, B., Selvakumar, N., Murugesh, R., “Characterization, testing and software analysis of AL-WC Nano composites,” IJST, Transactions of Mechanical Engineering, 34(M1) pp.105-117. 2013.


  • 3. Gnanasundara jayaraja, B., Selvakumar, N., Rajeshkum

    ar,P., “Enhancing the Properties of Al-WC Nano composites Using Liquid Metallurgy,” Experimental Techniques, pp.1-7, 2013.
  • 4. Senthil Babu, S., Vinayagam, B.K., “An Improved Prediction Model for Drilling Characteristics of Al/Sic Metal Matrix Composites,” International Review on modeling and simulations, 6(2) pp. 630-638, 2013.


  • 5. Ananth, G., Vinayagam, B.K., “A genetic algorithm based total productive maintenance model in comparison with neural networks for small and tiny enterprises,” International review on modeling and simulations, 6(1) pp.181-188, 2013.


Calendar Year: 2012


  • 1. Velmurugan,C., Subramanian, R.,Thirugnanam,S.,Anandavel, B., “Investigation Of Friction And Wear Behavior Of Hybrid Aluminum Composites,” Industrial Lubrication and Tribology, 64(3) pp. 152-163, 2012.


  • 2. Velmurugan,C., Subramanian, R., Thirugnanam,S.,Anandavel, B., “Experimental Study and Prediction using ANN on Mass Loss of Hybrid Composites,” Industrial Lubrication and Tribology, 64(3)pp.138-146, 2012.


  • 3. Mathivanan, P., Balakrishnan, M., Krishnan, H., “Impact Properties Of Aluminum - Glass Fiber Reinforced Plastics Sandwich Panels,” Materials Research, 15(3) pp. 347-354, 2012.


  • 4. Sivakumar, K., Natarajan, E., Kulasekharan, N., “Comparative Study between Experimental Work and CFD Analysis in A Square Convergent Ribbed Duct,” Emerging Trends in Science, Engineering and Technology, pp. 447-457, 2012.


  • 5. Sivakumar, K., Natarajan, E., Kulasekharan, N., “Gas Turbine Blade Cooling at Mid-Chord Region by Using Rib Turbulators - A Review,” Journal of Mechanical Engineering ((Strojnicky Casopis), 63(1) pp.1-16, 2012.


  • 6. Sivakumar, K., Natarajan, E., Kulasekharan, N., “Numerical Study of Turbulent Flow and Heat Transfer in Square Convergent Channel With 90o Inline Rib Turbulators,”International Journal Engineering and innovative technology (IJEIT), 1(4), pp.218-224, 2012.


  • 7. Senthil Babu, S., Vinayagam, B.K., “Study of some Parameters on Drilling of Al Based Metal Matrix Composites - A Review,” International Journal of Scientific and Engineering Research, 3(7) pp.1-4, 2012.


  • 8. Senthil Babu, S., Vinayagam, B.K., “Parameters Involved in Drilling of Al Based Metal Matrix Composites - A Review,” International Journal Engineering and innovative technology (IJEIT), 1(4) pp.91-94, 2012.


  • 9. Ananth, G., Vinayagam, B.K., “Implementation and fall of TPM in Micro Manufacturing Industries using SWOT Analysis – A Review.,”International Journal Engineering and innovative technology (IJEIT), 1 (4)pp.109-113, 2012.


  • 10. Gnanasundara jayaraja, B., Selvakumar, N., “Effect of WC Content in Aluminum Metal Matrix Sintered powder Composites,” European Journal of Scientific Research, 82(1), pp.9-16, 2012.


Calendar Year: 2011


  • 1. Velmurugan,C., Subramanian, R., Thirugnanam,S., Kannan, T., Anandavel, B., “Experimental Study on the Effect of SIC and Graphite Particles on Weight loss of AL6061 Hybrid Composite Materials,” Journal of Technology and Science Education, 2(1-2), pp.49-68, 2011.


  • 2. Velmurugan,C., Subramanian, R., Thirugnanam,S., Anandavel, B., “Experimental Investigations on Machining Characteristics of AL6061 Hybrid Metal Matrix Composites Processed by Electrical Discharge Machining,” International Journal of Engineering, Science and Technology, 3(8), pp.87-101, 2011.


Calendar Year: 2010


  • 1. Mathivanan,P., Balakrishnan,M., Krishnan,H., “Metal Thickness, Fiber Volume Fraction Effect on the Tensile Properties, Debonding of Hybrid Laminates,” Journal of Reinforced Plastics and Composites, 29(14) pp.2128-2139, 2010.


Calendar Year: 2009


  • 1. Maheskumar,S., Vinodh,S., Devadasan, S.R., Thirugnanam,S., Arumugam, M., Balakrishnan, K., “Application Study of Innovative Quality Circle Programme and its Decision Support System in a gear Manufacturing Company,” International Journal Process Management and Benchmarking, 3(1), pp.24-44, 2009.


Calendar Year: 2007


    • 1. Thirugnanam,S., Vinodh, S., Devadasan, S.R., “Innovative quality circle: A Technique for Coupling Innovation and Quality Through Employee Participation,” International Journal Services and Operations Management, 3(4), pp.478-495, 2007.


    S.No.

    Author

    Title of the Paper

    Volume No., Page No., Year

    Name of the Journal

    Impact Factor/SNIP/SJR

    1

    Dr. Thirugnanam

    Innovative Quality Circle a technique for coupling innovation and quality through employee participation

    Volume 3, No.4, pp.478 – 495, 2007

    International Journal of services and operations management

    -

    2

    Dr. Thirugnanam

    Application study of Innovative Quality Circle and its Decision Support System in a gear manufacturing company

    Volume 3, No.1, pp.24 – 46, 2009.

    International Journal of process Management and bench marking

    -

    3

    Dr. Thirugnanam

    Experimental study on the effect of SiC and graphite particles on weight loss of Al 6061 hybrid composite materials

    Volume 2, Number1/2, pp.49-68, 2011.

    Journal of Tribology and surface engineering

    -

    4

    Dr. Thirugnanam

    Investigations on Machining characteristics of Al 6061 hybrid metal matrix composites processed by electric discharge machining

    Volume 3,Number 8, pp. 87-101, 2011

    International Journal of Engineering, Science and Technology

    -

    5

    Dr. Thirugnanam

    Experimental study and prediction using ANN on mass loss of hybrid composites

    Volume 64, issue 3, pp.138-146,2012.

    Industrial Lubrication and Tribology

    -

    6

    Dr. Thirugnanam

    Investigation of Friction and Wear Behavior of Hybrid Aluminium Composites

    Volume 64, issue 3, pp.152-163, 2012

    Industrial Lubrication and Tribology

    -

    7

    Dr. P.Mathivanan

    Metal Thickness, Fiber Volume Fraction Effect on the Tensile Properties, Debonding of Hybrid Laminates.

    29 (14), 2128 to 2140.
    2010

    Journal of reinforced plastics and composites

    -

    8

    Dr. P.Mathivanan

    Title: Impact Properties of Aluminium - Glass Fiber Reinforced Plastics Sandwich Panels

    15 (3), 347 to 354, 2012

    Materials Research- Ibero-AMJ

    -

    9

    Mr. G. Ananth

    Implementation and fall of tpm in micro manufacturing industries using swot analysis-a review

    Volume 1, Issue 4, April 2012

    International Journal of Engineering and Innovative Technology (IJEIT)

    ISSN: 2277-3754

    10

    Mr. G. Ananth

    A genetic  algorithm based total productive maintenance model in comparison with neural networks for small and tiny enterprises

    Vol.6,N.1,Praise Worthy Prize S.r.l. Naples,Italy,2013, pp.181-188.

    International eview on modeling and simulations

    Scopus,SNIP 1.287,SJR 0.297

    11

    Mr.S.Senthilbabu

    Parameters involved in drilling of Al based Metal Matrix Composites – A Review

    Vol1(4) Pp91to 94, 2012

    International Journal of Engineering and Innovative Technology (IJEIT)

    ISSN:2277-3754

    12

    Mr. S.Senthilbabu

    An Improved Prediction Model for Drilling Characteristics of Al/Sic Metal Matrix Composites

    Vol.6. n. 2 ,Praise Worthy Prize S.r.l. Naples,Italy, 2013,  pp. 630-638,

    International review on modeling and simulations

    Scopus,SNIP 1.287,SJR 0.297

    13

    Mr. K. Sivakumar

    Influence of Rib Height on Heat Transfer Augmentation – Application to Aircraft Turbines

    DOI:10.1515/tjj2013-0035

    International Journal of Turbo Jet Engines

    0.261

    14

    Mr. K. Sivakumar

    CFD Simulation and Experimental Investigation of Convection Heat Transfer in a Rectangular Convergent Channel with Staggered Ribs

    Vol.7. N.3

    International Review of Mechanical Engineering (I.RE.M.E)

    6.46

    15

    Mr. K. Sivakumar

    Numerical study of turbulent flow and heat transfer in square convergent channel with 90˚ inline rib turbulators

    Vol.1. (3). Pp. 218-224.

    International Journal of Engineering and Innovative Technology

    -

    16

    Mr. K. Sivakumar

    Gas turbine blade cooling at mid chord region by using rib turbulators – a review.

    Vol.63 (1). pp. 1-16.

    Journal of Mechanical Engineering (Strojnicky casopis)

    -



    MOU's WITH INDUSTRIES

    Name of the Industries
    Nature of Industries
    M/S Consolidated Engineering Services
    Development and up gradation of technology in the fields of Thermal and Hydraulics
    M/S VI Microsystems Pvt. Ltd
    Development and up gradation of technology in the fields of Automation, Hydraulics and Pneumatics control systems
    M/S SS Design Pvt. Ltd.
    Development and up gradation of technology in the fields of industrial machines


    Major Research Projects Done By Our Students

    • Development and Characterization of Magnesium Matrix Composites
    • Experimental Evaluation and Simulation of Synthetic Hybrid Composite Materials
    • Waste Heat Energy Recovery from an Internal Combustion Engine using TEG
    • Recycling Plastic Waste into Artificial Fuel
    • To Develop Mathematical Model and Prediction of quality of Hybrid Composite Material
    • Mango Seed as a Composite Material


    Supports for Research

    • Permission, Sabbatical Leave and OD for Higher Studies.
    • Sponsorship for Conferences (India & abroad).
    • Sponsorship for Summer/ Winter Schools/Training Programmes.
    • Support for Professional Societies / Activities.
    • Encouraging Academic Achievements with Incentives.
    • Incentives for Research & Publications.
    • Ph.D. Allowance for faculty
    • Good Research Atmosphere & Recognition.
    • Research Committee at College Level